PAL2 Portable Aquatic Lift
The Pal2 Aquatic Lift is a portable free standing lift with a fixed design, making it easy to move by one person. It has a lifting capacity of 136 kg and is powered by a 24v battery operated screw driven actuator. The lift provides full mechanised left and right, as well as up and down motion, ensuring consistent operation and minimal service problems.
Constructed from corrosion-resistant materials such as powder-coated stainless steel and aluminium, the Pal2 is virtually maintenance-free. Its unique seat is designed to provide the user with maximum safety, comfort, and ease of transfer.
The lift’s hand control is water-resistant, allowing either the user or the attendant to operate it with ease. It features 240 degrees of rotation, while the LiftOperator control box and battery are also water-resistant. For long-term storage, an optional cover is available for purchase to protect the system.
The seating system of the Pal2 has been developed through years of research. The seat is deeper and higher, providing a stable platform for sitting and accommodating swimmers with reduced trunk stability. The flattened seat eliminates any ridge that could hamper transferring, and attachment points for both the standard seat belt assembly and an optional stability vest are available.
In addition, the lift includes a removable, moulded plastic footrest that will float upwards to prevent damage if the user lowers the chair too low over the deck. The armrests have also been strengthened to provide support when transferring onto the seat and can be rotated out of the way during a transfer. They can be added to a seat after the fact without purchasing an entire new assembly.
The Pal2 also offers a sling option. By undoing two bolts, users can remove the arm and seat assembly and replace it with the Sling Jib. The sling and jib can be retrofitted to existing Splash, Pal, and Pal2 lifts.
Pal2 Lift, Footrest, Arm Rests, Battery Charger, Battery Cover and Seat Belt Assembly. (Note: Pal Secure Kit shown in the video is not required in Australia)
The client accesses the lift seat then using the left and right buttons on the hand controller rotates the lift over the pool then using the up or down button to raise or lower the seat. The client can then be floated off the seat. Getting out is just as simple.
Move lift to where needed.
Sling and Jib Attachment
Use instead of the seat to lift and lower.
Spine Board Attachment
The Spine Board Attachment works with any standard spine board (not included). Simply remove the chair assembly by pulling the attachment pin and replace that assembly with the Spine Board Attachment. One person can easily extract an injured swimmer from a pool.
Use the cover to protect your investment when not in use..
White, waterproof seat pad designed to enhance comfort and minimise potential skin damage that could occur during transfer is available as an optional accessory.
102 x 122 x 145cm (L x W x H) 547 kg
Check below documents: