Backstroke Post – AQ-BP
These Backstroke Posts should be installed 5 metres from each end of the pool. Backstroke flags should be 1.8 metres above the water. The backstroke posts slide into sockets that are core drilled and glued into the concourse/coping.
FR 2.9 Backstroke Turn Indicators – Flagged ropes shall be suspended across the pool, 1.8 metres above the water surface, from fixed standards placed 5.0 metres from each end wall. Both sides of the pool must have distinctive marks, and where possible on each lane rope, 15.0 metres from each end wall.
(As of November 2017)
An eyelet is attached to the post allowing the backstroke flags to be tied or clipped to the post. The standard post is the most popular choice. Uses the AQ-PS01 Post Socket for the 38mm or other diameters available.
WD (Wet Deck)
An eyelet is attached to the post allowing the backstroke flags to be tied or clipped to the post. The WD is a little taller to cater for pools with the sockets at water level to ensure the 1.8-metre clearance is maintained. Uses the AQ-PS01 for the 38mm or other diameters available.
An eyelet is attached to the post allowing the backstroke flags to be tied or clipped to the post. You will need to twist the post until it locks into position. The twist-lock requires the use of AQ-PS01/TL Post Sockets for 38mm or other diameters available.
Material: 316 Stainless Steel
Finish: Mirror Polished
Tube Diameters: 38mmø, 44mmø and 50mmø
Length to eyelet: 1800mm or 2100mm Other lengths available on request.
It may take 4 weeks for delivery if the product is not in stock. Posts and Sockets are sold separately.