PAINT – SWIFTVULC – Rubber Based

PAINT – SWIFTVULC – Rubber Based

PAINT – SWIFTVULC – Rubber Based

is a single pack rubber coating.The paint, when cured, is non-toxic. The unique properties of recoatabillity, durability and chemical resistance are ideal for use in the following areas:

  • Swimming pools.
  • Sewage, water treatment plants and reservoirs.
  • Breweries.
  • Bridges.
  • Road and rail tankers.
  • Chemical plants.
  • Dairies and milking sheds.
  • Farm machinery.
  • Water tanks.
  • Silos.
  • Fish ponds.
  • Hatcheries.
  • Recoat of galvanised iron, terracotta and cement tile roofs.

    Benefits

  • Resistant to mould, algae, fungi and bacterial growth.
  • Versatile, can be used on a wide range of metals, mineral substrates, and other materials.
  • Long shelf life (Over five years in unopened containers).
  • Extremely water-resisting at low film builds.
  • Good corrosion-resisting properties when used on steel and other metals prone to oxidisation.
  • High binder content compared to most commonly available chlorinated rubber coatings.
  • Excellent adhesion.
  • Unlike vinyl chloride monomers, chlorinated rubber resin is not classified as a carcinogen.
  • Excellent aqueous chemical resistance.
  • Effectively unlimited time between subsequent coats.
  • Single-pack product means no mixing, no wastage.
  • No special primer needed for many applications – contact office for details.
  • Excellent UV stability.
  • Dried film is effectively inert and does not release chemicals which will alter chemical balance of water.
  • Economical

    Sizes
    Available in 1 litre and 4 litre tins.
    Pale Blue also available in 20 litre drum.

    Temperature
    Do not paint in temperatures under 10 degrees or above 30 degrees Celcius or in humidity exceeding 85%.

    Coverage
    9 square metres per litre to produce 40 micron DFT.

    Drying Time
    Touch Dry – 1-2 hours
    Recoat – Minimum 8 hours, at ambient temperature of 25 degrees Celcius and 50% relative humidity. However best at 24 hours apart at same time of day.
    Full Solvent Release – approximately 7-21 days depending on enviroment. Paint must be allowed to fully dry before it is immersed in water. Solvent release from coating is not possible once the coating is immersed in water.

    Additional Products
    [PPAI4900T Special Thinners], [PPAI5300D Degreaser] and [PPAI7100 Non-Skid Additive] are also available.

    Surface Preparation
    Different pool surfaces require different preparations before painting or repainting. If you are not familar with the use of this paint, please contact the office for further information. Written instructions are available when purchasing the paint.

Code Description
PPAI1101 PAINT Pool Deep Blue 1 litre
PPAI1102P PAINT Pool Dolphin 1 litre
PPAI1202I PAINT Pool Mid Blue 1 litre
PPAI1901P PAINT Pool Black 1 litre
PPAI1902P PAINT Pool White 1 litre
PPAI1905P PAINT Pool Pale Blue 1 litre
PPAI2905P PAINT Pool Pale Blue 20 litre
PPAI4102P PAINT Pool Dolphin 4 litre
PPAI4103P PAINT Pool Deep Blue 4 litre
PPAI4202I PAINT Pool Mid Blue 4 litre
PPAI4901P PAINT Pool Black 4 litre
PPAI4902P PAINT Pool White 4 litre
PPAI4905P PAINT Pool Pale Blue 4 litre

 

Type: Paint Coatings,
Availability:

In stock