Glacier Platform Water Operated Lift (New)
The Glacier Battery Operated Platform Lift accommodates an Aquatic Wheelchair for the individual that needs assisted stabilised support for entry into the pool or spa.
The Glacier Water Operated Platform lift is designed for use in commercial swimming pools. The lift has been specifically designed to replace the need for a ramp in a pool having no less than 1.06 cm (42") to no more than 152 cm (60") deck to the floor of pool at the installation site. This lift powered by water pressure; pressure of no more than 55 P.S.I (pounds per square inch) is required for the lift’s operation. The lift is rated for a 272 kg lifting capacity with a safety factor of 1.5.
Operating Controls & Water Source
The lifting mechanism is 15 cm (6”) PVC, open atmosphere cylinder to facilitate 121 cm (48”) of vertical travel.
• A valve control handle is positioned at deck level.
• All metallic components of the lift are fabricated of 300 series stainless steel.
A stainless steel water box is installed in the pool deck adjacent to the installation site of the assisted access lifting device. The water box is 200 mm x 200 mm x 153 mm (W x L x D) (8” x 8” x 6 1/8” W x L x D) and is complete with vandal proof cover. It is provided with a 29 mm (1 1/8”) diameter hole in the side wall to allow for a supply line.
The platforms measures 89 cm x 122 cm (35 7/8” x 48”) and has intergrated side rails. the rails are located 876 mm (34 ½”) from the platform surface, constructed of 25.4 mm O.D. x 21.183 mm I.D. (1.00” O.D. x .834” I.D.) 300 series stainless steel tube.
The access lift is provided with a locking gate assembly. The gate assembly is constructed of 300 series stainless steel wire mesh. It has a 300 series stainless steel mechanical latch and hinge assembly.
Pressure Amplification System
A pressure amplification system is recomended to assure constant water pressure to the lifting mechanism. It should include a 3/4 horse power booster pump, approx. 72 Litre pressure tank, pressure gauge, and pressure regulator. The pressure amplification system should be located in the equipment mechanical room.
Lifting Capacity: 272 kgs
For decks to pool floor 1.06 m to 1.52 m
It comes with a 2 year limited warranty.
Lifts are custom made to suit individual requirements.
Allow12 weeks for delivery.
|Glacier Water Lift Spec Diagram (700 kb)|
|Glacier Water Lift Spec Manual (1.8 Mb)|
Lift is supplied unassembled. Assembly and installation is not included.
|PLIF50005||Glacier Water Operated Platform Lift|
Glacier Platform Water Operated Lift
- Product Code: PLIF50005
- Availability: In Stock