Categories

Troubleshooting & Safety Data Sheets

Safety Data Sheets

  Pool Sanitisers Adjusters & Balancers Algaecide Solutions
  IQ Maxi Chlor 700 Granular & Tablets IQ Liquid Pool Acid IQ Pool Solutions Algae Eliminator  
  IQ Maxi Chlor Stabilised Chlorine IQ Granu-Cid IQ Black Spot  
  IQ Maxi Chlor Stabilised Chlorine Tablets IQ pH Down IQ Pool Solutions Maintenance Algaecide  
  IQ Maxi Chlor 5 in 1 Tablets IQ pH Up IQ Pool Solutions Metal Free Algaecide  
  IQ Ezi-Chlor IQ Alkalinity Up IQ Pool Solutions Polymax Algaecide  
  IQ Liquid Pool Chlorine IQ Water Hardener IQ Pool Solutions Black Spot Algae Treatment & Winteriser  
  IQ Granu-Chlor IQ Sun Block IQ Pool Solutions Tropical Strength Alaecide  
         
  Spa Sanitisers Clarifiers Solutions Maintenance Solutions  
  IQ Spa Solutions Spa Brom IQ Pool Floc IQ Pool Solutions Cell Clean  
  IQ Spa Solutions Lithium IQ Maxi Clear Skimmer Tablets IQ Pool Solutions Stop-Cal  
    IQ Pool Solutions Super Clear IQ Pool Solutions Salt Cell Protector  
  Shock Treatments IQ Pool Solutions Fast Floc IQ Pool Solutions Duck Away  
  IQ Shock & Swim IQ Pool Solutions Pool Shimmer IQ Pool Solutions Enhance  
  IQ Spa Solutions Shock Right Plus IQ Pool Solutions PAC IQ Pool Solutions Nil-Phos  
  IQ Pool Solutions C-5 IQ Spa Solutions Shimmer & Shine IQ Spa Solutions Chlorine Neutraliser  
  IQ Pool Solutions C-5 Tablets Super Cubes Plus IQ Spa Solutions Spa Enhance  
      IQ Spa Solutions Flat n Foam  
      IQ Spa Solutions Spa Bath & Cartridge Cleaner  
    Stain Solutions IQ Pool Solutions Natural Filter Cleaner & Degreaser  
    IQ Pool Solutions Metal Magnet DE Filter Powder
      IQ Spa Solutions Spa Start & Balance
PROBLEM SOLUTION
Murky & Cloudy Water Always check the pH level of the pool to make sure it is between 7.2 and 7.6, then boost the chlorine levels using IQ SHOCK & SWIM if necessary.
  1. If your pool is a bit cloudy and the bottom is visible, this can be fixed with IQ SUPER CLEAR or IQ POOL SHIMMER.
  2. If your pool is very cloudy and you can't see the bottom, it means there are lots of suspended particles or dead algae cells in the pool. Use IQ FAST FLOC to send them straight to the pool floor.
  3. Vacuum particles to waste, then use IQ CLEAR TABS to bring the sparkle back.
Black Spot Algae
  1. Check the pH level of the pool to make sure it's between 7.2 and 7.6, then boost the chlorine levels using IQ EZI CHLOR.
  2. Turn the pump on.
  3. Brush the affected areas vigorously to remove the protective coating from the algae. Add IQ BLACKSPOT/WINTERISER or IQ MAINTENANCE ALGAECIDE run filter for 24 hours with regular backwashing.
  4. Murky & Cloudy water process may need to be followed in extreme algae causes.
For an additional preventative measure, add IQ NILPHOS and regular treatment of IQ MAINTENANCE ALGAECIDE
Green Algae Green algae grows fast and can turn a pool green overnight. You'll want to get rid of it just as fast.
  1. Start by ensuring the pH level of your pool is between 7.2 and 7.6, then boost the chlorine levels using protective products like IQ EZI CHLOR.
  2. Add IQ ALGAE ELIMINATOR to the pool and run filter overnight.
  3. If your pool is cloudy, it means that there is a lot of suspended dead algae cells in the pool. Use IQ SUPER CLEAR or IQ CLEAR TABS to send them straight to the pool floor. (Refer to Murky and Cloudy Water treatment guide).
  4. Vacuum particles to waste, then use IQ CLEAR TABS to bring the sparkle back.
For an additional preventative measure add IQ NILPHOS and IQ MAINTENANCE ALGAECIDE
Mustard Algae Mustard algae has a yellow, powdery appearance and tend to thrive in the shady part of the pool. Like Black Spot algae, they have protective layers and are therefore more resistant to chlorine.
  1. Check the pH level of the pool to make sure it's between 7.2 and 7.6, then boost the chlorine levels using IQ EZI CHLOR.
  2. Turn the pump on.
  3. Brush the affected areas vigorously to remove the protective coating of the algae. Add IQ POLYMAX run filter for 24 hours.
  4. If your pool is cloudy, it means that there are a lot of suspended dead algae cells in the pool. Use IQ SUPER CLEAR or IQ POOL SHIMMER to send them straight to the pool floor. (Refer to Murky and Cloudy Water treatment guide).
  5. Vacuum particles to waste, then use IQ CLEAR TABS to bring the sparkle back.
For an additional preventative measure, add IQ NILPHOS and IQ MAINTENANCE ALGAECIDE.
NOTE: All cleaning equipment should remain in the pool when treating to prevent reinfestation
Staining Staining is either caused by metals such as iron, copper or manganese entering the pool water or organic matter such as pigments from plants which have accumulated in the pool.
  1. Start by ensuring the pH level of your pool is between 7.2 and 7.6.
  2. Add IQ STAIN REMOVER directly to the stain by using your pool pole or plumbing pipe with a sock attached to the bottom and pour stain remover directly down the pole.
  3. Should the stain be metal based then the addition of IQ METAL MAGNET is required.
  4. When the treatment is complete, ensure that the pH level is between 7.2 and 7.6.
 
 
 




© Copyright 2017 | All Rights Reserved | Aquachem
Web Design by Sites n Stores